Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy

ABSTRACT

A combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process.     

Boosted hydrogen evolution activity from Sr doped ZnO/CNTs nanocomposite as visible light driven photocatalyst

CNTs were decorated onto Sr doped ZnO nanoparticles to construct an efficient photocatalyst via a facile sol-gel method. The as-fabricated Sr doped ZnO/CNTs with recyclability exhibits Sr and CNTs content dependent hydrogen evolution activit under visible light illumination. The Sr doped ZnO/CNTs photocatalyst shows the highest hydrogen evolution rate of 2732.2 μmolh^?1g^?1, which is 33.7 and 2.83 times higher than pure ZnO and Sr doped ZnO photocatalysts, respectively. The improved hydrogen evolution activity of Sr doped ZnO/CNTs is primarily assigned to high surface area, Sr doping and construction of heterojunction, which can extend the light absorption, decrease the optical band gap and improve the charge separation. Moreover, the underlying photocatalytic mechanism is proposed on the basis of Mott-Schottky study and explains the interfacial charge transfer process from ZnO to CNTs and Sr. This work open new strategies to synthesize CNTs based nanocomposite for hydrogen evolution.     

Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach

Reinforcement of PEEK by nanoparticles such as multiwalled carbon nanotubes (MWCNTs), is a promising technique to prepare PEEK nanocomposites with improved properties for promising biomedical applications. However, proper dispersion of MWCNTs in the polymer matrices is a primary processing challenge. The present study reports a novel and environmentally beneficial approach for homogeneous dispersion of MWCNT in PEEK by using ionic liquid (IL) 1-ethyl-3-methylimidazolium hydrogen sulfate ([EMIM][HSO₄]). Neat PEEK, PEEK-MWCNTs (using conventional organic solvent dimethylformamide), and PEEK-MWCNTs-IL (using [EMIM][HSO₄]) nanocomposites were fabricated via melt-compounding and compression molding techniques. The fabricated composites were characterized for morphological, thermal, and mechanical properties and compared to those of neat PEEK and PEEK-MWCNTs. Ionic liquid provoked proficient dispersion of the MWCNTs in PEEK, as confirmed by FESEM and optical micrographs. The thermal stability of PEEK-MWCNTs-IL composite was significantly superior to that of the neat PEEK and PEEK-MWCNTs. Analysis of tensile strength and nanoindentation depicted that the modulus of elasticity of PEEK-MWNCTs-IL was significantly increased by 76% as compared to that of neat PEEK. We believe that the present work could provide a new and green platform for the manufacturing of PEEK nanocomposites with enhanced dispersion of nanofillers for biomedical applications.     

ZnO–SnO2 nanocubes for fluorescence sensing and dye degradation applications

ZnO–SnO₂ nanocubes were used as promising material for efficient sensing of p-nitrophenol and faster photocatalytic degradations of dyes like methyl orange (MO), methylene Blue (MB) and acid orange 74 (AO74). ZnO–SnO₂ nanocubes were prepared by the facile solution process at 50 °C using Zn(NO₃)₂·6H₂O and SnCl₂·2H₂O as a precursor in the presence of ethylenediammine. The synthesized material was examined for its morphological, structural, crystalline, optical, vibrational, and compositional studies by using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and photoluminescence spectroscopy. FESEM studies revealed the formation of well-defined ZnO–SnO₂ nanocubes where the structural examinations revealed the formation of a crystalline tetragonal rutile phase for SnO₂ with some crystal sites doped with Zn. The as-synthesized nanocubes were explored for their photocatalytic activities towards three different dye viz. MO, MB, and AO74. Practically, complete degradation of AO74 was seen within 4 minutes of photo-irradiation in the presence of 0.05 g ZnO–SnO₂ nanocubes. However, 97.17% and 41.63% degradations were observed for MB and MO within 15 and 60 minutes, respectively. All the dye degradation processes followed the pseudo-first-order kinetic model. Moreover, the as-synthesized nanocubes were utilized to fabricate highly sensitive and selective fluorescent chemical sensor for the detection of p-nitrophenol (PNP). ZnO–SnO₂ nanocubes showed a very low detection limit of 4.09 μM for the detection of PNP as calculated according to the 3σ IUPAC criteria. Further, the as-synthesized ZnO–SnO₂ nanotubes were found to be highly selective for p-nitrophenol as compared to the other two isomers.     

Preliminary Structural Data Revealed That the SARS-CoV-2 B.1.617 Variant's RBD Binds to ACE2 Receptor Stronger Than the Wild Type to Enhance the Infectivity

The evolution of new SARS-CoV-2 variants around the globe has made the COVID-19 pandemic more worrisome, further pressuring the health care system and immunity. Novel variations that are unique to the receptor-binding motif (RBM) of the receptor-binding domain (RBD) spike glycoprotein, i. e. L452R-E484Q, may play a different role in the B.1.617 (also known as G/452R.V3) variant's pathogenicity and better survival compared to the wild type. Therefore, a thorough analysis is needed to understand the impact of these mutations on binding with host receptor (RBD) and to guide new therapeutics development. In this study, we used structural and biomolecular simulation techniques to explore the impact of specific mutations (L452R-E484Q) in the B.1.617 variant on the binding of RBD to the host receptor ACE2. Our analysis revealed that the B.1.617 variant possesses different dynamic behaviours by altering dynamic-stability, residual flexibility and structural compactness. Moreover, the new variant had altered the bonding network and structural-dynamics properties significantly. MM/GBSA technique was used, which further established the binding differences between the wild type and B.1.617 variant. In conclusion, this study provides a strong impetus to develop novel drugs against the new SARS-CoV-2 variants.     

An improved particle swarm optimisation for unit commitment in microgrids with battery energy storage systems considering battery degradation and uncertainties

Using electric storage systems (ESSs) is known as a viable strategy to mitigate the volatility and intermittency of renewable distributed generators (DGs) in microgrids (MGs). Among different electric storage technologies, battery energy storage (BES) is considered as the best option. In unit commitment (UC) module, the set of committed dispatchable DGs along with their power, power exported to/imported from macrogrid and status and power of ESS units are determined. In this paper, BES degradation is considered in UC formulation and an efficient particle swarm optimisation with quadratic transfer function is proposed for solving UC in BES‐integrated MGs, while the uncertainties of demand, renewable generation and market price are considered and dealt with robust optimisation. UC is formulated as a multi‐objective optimisation problem whose objectives are MG operation cost and BES degradation. The resultant multi‐objective optimisation problem is converted into a single‐objective optimisation problem and the effect of weight factors on MG operation cost and BES lifecycle are investigated. The results show that by consideration of BES degradation in objective function, BES lifecycle increases from 350 to 500 and the minimum depth of charge increases from 5.5% to 34%; however, MG operation cost increases from $8717 to $8910.2. The results also show that by consideration of uncertainties, MG's operation cost increases by 8.22%.     

Verification of unified effective stress theory based on the effect of moisture on mechanical properties of fiber reinforced unsaturated soil

The unified effective stress theory based on suction stress (SSCC theory) enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. This study provides experimental verification of this theory through the unconfined compressive strength test (UCS) and indirect tensile test strength (ITS) on silty clay soil stabilized with fiber. A series of matric suction, ITS, and UCS tests were conducted to validate the SSCC theory through the representation of the results of ITS and UCS tests in terms of mean total stress (p) versus deviatoric stress (q) and mean effective stress (p`) versus deviatoric stress (q). The results of the validation procedures showed that the SSCC theory is applicable and valid at a range of 6%–16% of water content on the silty clay and the silty clay fiber-reinforced soils. There is a small fluctuation in the increase of ITS and UCS values with increasing fiber content due to randomly oriented distribution of the fiber. The addition of glass fiber does not significantly affect the capacity of water retention of the soil. It improves the condition of the mechanical soil properties at the end of construction more than of the effective stress condition.     

Novel composite membrane based on zirconium phosphate-ionic liquids for high temperature PEM fuel cells

Composite membranes composed of zirconium phosphate (ZrP) and imidazolium-based ionic liquids (IL), supported on polytetrafluoroethylene (PTFE) were prepared and evaluated for their application in proton exchange membrane fuel cells (PEM) operating at 200 °C. The experimental results reported here demonstrate that the synthesized membrane has a high proton conductivity of 0.07 S cm^?1, i.e, 70% of that reported for Nafion. Furthermore, the composite membranes possess a very high proton conductivity of 0.06 S cm^?1 when processed at 200 °C under completely anhydrous conditions. Scanning electron microscopy (SEM) images indicate the formation of very small particles, with diameters in the range of 100–300 nm, within the confined pores of PTFE. Thermogravimetric analysis (TGA) reveals a maximum of 20% weight loss up to 500 °C for the synthesized membrane. The increase in proton conductivity is attributed to the creation of multiple proton conducting paths within the membrane matrix. The IL component is acting as a proton bridge. Therefore, these membranes have potential for use in PEM fuel cells operating at temperatures around 200 °C.     

Improved formic acid oxidation using electrodeposited Pd–Cd electrocatalysts in sulfuric acid solution

In the present research, nanostructured Pd–Cd alloy electrocatalysts with different compositions were produced using the electrodeposition process. The morphology of the samples was studied by scanning electron microscopy analysis. Also, the elemental composition of the samples was determined by energy-dispersive X-ray spectroscopy and elemental mapping tests. Tafel polarization and electrochemical impedance spectroscopy methods were employed to determine the electrochemical corrosion properties of the synthesized samples in a solution containing 0.5 M sulfuric acid and 0.1 M formic acid. The linear sweep voltammetry, cyclic voltammetry, and chronoamperometry techniques were also employed to evaluate the electrocatalytic activity of prepared samples toward the oxidation of formic acid. In this respect, the influence of some factors such as formic acid and sulfuric acid concentrations and also potential scan rate was investigated. Compared to the pure Pd sample, the Pd–Cd samples were more reactive for the oxidation of formic acid. Besides, the sample with a lower amount of Pd (Pd_1·3Cd) demonstrated much higher electrocatalytic activity than the Pd_7·1Cd and Pd_2·1Cd samples. The observed high mass activity of 15.06 A mg^?1_Pd for the Pd_1·3Cd sample which is 21.1 times higher than Pd/C is an interesting result of this study.